hi all
always remember that you can take *both* buses outputs (master and the alternate one) and thus the result will be *added* (ie. mixed-down);
the resulting mixed signal may well go over +0dBfs at some point so that if you're exporting (or recording from both outputs via jack) to a *non-floating-point* format you will get a damaged audio sample file due to severe clipping eg. over-the-scale integer samples will "wrap-around" and will become negative and vice-versa, in a way that maybe well beyond repair.
so please: a. make it sure the mix never goes above +0dBfs having a wise but lower levels on each of the output bus gain faders; or/and b. select on floating-point sample file format for export and recording so that you may correct the mix later, anytime anyway.
hth.
cheers
Copyright (C) 2006-2024 rncbc aka Rui Nuno Capela. All rights reserved.
Powered by Drupal
Recent comments
13 hours 20 min ago
15 hours 5 min ago
19 hours 55 min ago
1 day 17 hours ago
1 day 17 hours ago
2 days 3 hours ago
2 days 2 hours ago
2 days 12 hours ago
2 days 15 hours ago
2 days 16 hours ago